|
|
Post by KrazySk8 on Jul 13, 2004 15:24:17 GMT -5
hey. ok well i hear if u switch from abec 1 bearings to abec 5, u will likely fall off becuz its way faster...that true?  |
|
|
|
Post by flooghop on Jul 14, 2004 15:14:19 GMT -5
sumtimes cuz u arent used 2 going that fast
|
|
flip
Full Member
Posts: 229
|
Post by flip on Jul 14, 2004 16:41:30 GMT -5
probably, just stay centered and don't lean back/be ready for it
|
|
|
|
Post by Hopein on Jul 14, 2004 16:45:55 GMT -5
Yeah most likely if you jump up that many it will be harder for you to land at first, you'll just have to get use to it and don't be scared. sure the board will fly out a couple of times but just work with it. and don't try to go as fast as you use to even though you will just don't give as hard of pushes that you use too.
|
|
|
|
Post by KrazySk8 on Jul 14, 2004 17:33:45 GMT -5
has anyone ever just stayed at 3 abec and not moved up? or have you all moved up?
|
|
|
|
Post by KrazySk8 on Jul 14, 2004 17:34:15 GMT -5
i mean, ABEC 1 but im at ABEC 3 sooo yeah
|
|
HedsIc
Full Member
powell, old school
Posts: 155
|
Post by HedsIc on Jul 14, 2004 19:00:59 GMT -5
first bearings i used was swiss bearings. atleast first i can remember, i can never tell a difference in what ABEC if any it is so it doesn't really matter to me. i could skate abec 1 for a month then move to 5 and not even notice it other then the board goes better
|
|
flip
Full Member
Posts: 229
|
Post by flip on Jul 14, 2004 20:01:32 GMT -5
I started with the bones swiss precision(still use those type of bearings) bones aren't rated on abec
but if they were some of the bones bearings would be above abec 7, like the ceramics
|
|
